Located along the picturesque waterfront of Drummoyne in Sydney, New South Wales, Bianca is a prestigious multi-residential development featuring an exclusive collection of spacious 3- and 4-bedroom waterfront residences. Developed by Central Element and architecturally designed by the renowned firm SJB, this project showcases meticulous attention to detail, uncompromising craftsmanship, and expansive harbor views.

To fulfill the architectural vision of maximizing Sydney Harbour vistas while adhering to strict structural and weathering mandates under Australia’s National Construction Code (NCC Class 2), Meichen Windows & Doors was selected to design, engineer, and supply custom-made overseas glazing systems featuring Ultra-Slim Frames.

Project Specifications at a Glance

• Project Name: Bianca, Drummoyne

• Client / Developer: Central Element

• Architectural Firm: SJB

• Sector / Project Type: Luxury Multi-Residential / Apartment Class 2 Building

• Location: Drummoyne, Sydney, New South Wales, Australia

• Glazing & Systems Supplier: Meichen Windows & Doors

• Primary System Supplied: Ultra Slim Coastal SD205-AS960 Sliding / Stacker Door System

• Framing Envelope: Full 150 mm / 205 mm Heavy-Duty Commercial Aluminium Framing

• Glazing Specification: High-Performance Double Glazed & Laminated Safety Glass

• Specialized Features: Flush Drains Threshold Design, Custom Overseas Ultra-Slim Profiles

System Architecture & Engineering Highlights

BIANCA DRUMMOYNE — FENESTRATION SYSTEM MATRIX

• Primary System: Ultra Slim Coastal SD205-AS960 Sliding/Stacker Doors
• Structural Envelope: 150 mm / 205 mm Heavy-Duty Commercial Framing
• Threshold Architecture: Integrated Flush Drains Barrier-Free Drainage
• Glazing Configuration: High-Mass Double Glazed & Laminated Safety Units

1. Ultra-Slim Coastal SD205-AS960 Sliding & Stacker Door Systems

Waterfront luxury residences require minimal sightlines to frame wide harbor panoramas without compromising structural resistance against severe coastal marine wind loads.

• Minimalist Visual Sightlines: Featuring custom overseas Ultra-Slim Frame engineering, the SD205-AS960 sliding and stacker door system reduces vertical profile bulk, allowing maximum daylight penetration and uninterrupted harbor views.

• 150 mm / 205 mm Commercial Frame Depth: Built with deep, heavy-gauge commercial extrusions (150 mm and 205 mm options), providing the structural inertia needed to support large, heavy glass sashes under high wind pressure zones (AS 2047 compliant).

2. Concealed Flush Drains Threshold Design

In high-end alfresco architectural design, creating a seamless transition between indoor living rooms and outdoor waterfront balconies is a top priority.

• Barrier-Free Architectural Flow: The flush threshold design allows internal sub-floor finishes to line up smoothly with external outdoor decking.

• High-Capacity Drainage Integration: A custom-engineered flush drain sub-sill channels driving rain rapidly away from the tracks, preventing water ingress even during intense coastal storms and high negative pressure events.

3. Double Glazed & Laminated High-Mass Glass Configuration

Exposed coastal locations require superior thermal performance, UV protection, and high acoustic dampening against marine wind noise.

• Laminated Safety Performance: Provides high impact resistance and blocks harmful UV radiation, protecting high-end interior finishes and furniture from sun fading.

• Double Glazed Thermal Barrier: Lowers overall building U-values and Solar Heat Gain Coefficients (SHGC), helping the project meet strict NCC Section J / BASIX energy compliance targets.

Compliance and Engineering Verification

As a Class 2 luxury multi-residential development in Sydney, the Bianca project required verified engineering documentation and rigorous quality control:

AGWA Corporate Membership: Meichen is an active member of the Australian Glass and Window Association (AGWA).

In-House AGWA/AFTI Qualified Engineers: Oversighted by certified engineers proficient in AS 2047 (Windows & External Glazed Doors), AS 1288 (Glass in Buildings Selection & Installation), and the NCC.

Comprehensive Audit Support: Backed by CSi PAS-Mark and JAS-ANZ accreditation schedules, ensuring complete compliance for council sign-off and building consent approvals.

Why Tier-1 Developers & Renowned Architects Partner with Meichen

1. Bespoke Ultra-Slim Engineering: Capability to manufacture custom overseas ultra-slim sliding systems tailored to the exact aesthetic specifications of leading architectural firms like SJB.

2. Waterfront Performance Mastery: Expertise in integrating flush drainage systems and marine-grade corrosion-resistant anodized/powder-coated finishes for coastal applications.

3. End-to-End B2B Service: Providing detailed shop drawings, wind load deflection calculations, and complete compliance certification packages for high-density luxury developments.

Contact Our Commercial Engineering Desk

Are you developing a luxury waterfront residential project or Class 2 multi-family complex requiring custom ultra-slim commercial sliding door systems?

Speak with the Meichen Engineering Team to request CAD cross-sections, structural wind load reports, or project-specific quotes:

• Email Inquiries: sales@mcwindow.com.au / contact@mcwindow.co.nz

• Official Compliance Standards: Certified across AS 2047, AS 1288, SNZ TS 4211:2022, and NZS 4223.